Mercedes Benz 7G Tronic 722.9 Transmission Control Module TCM Conductor Plate Repair.
YOU ARE NOT BUYING THE TRANSMISSION CONTROL MODULE
YOU ARE BUYING A REPAIR KIT THAT WILL BE INSTALLED
IN YOUR ORIGINAL CONTROL MODULE.
READ FURTHER FOR THE DETAILS
Known problems that will be corrected by this
- TROUBLE CODES FOR :
~Y3/8N1 turbine speed sensor
0717 The signal from component Y3/8n1 (Turbinespeed sensor (VGS)) is not available (code P2204)
0718 Component Y3/8n1 (Turbine speed sensor (VGS)) is defective (code P2205)
~Y3/8N2 internal speed sensor 2766 Excessive rpm's have occurred at component Y3/8n2
(Internal speed sensor (VGS))
(code P2201) 2767 The signal from component Y3/8n2
(Internal speed sensor (VGS)) is not available (code P2200)
2768 Component Y3/8n2 (Internal speed sensor (VGS)) is defective
- As a result - VEHICLE SHIFTS INTO LIMP MODE
*Contact us if you have more or different trouble
code/s. We do have additional repair
problem/s as well (extra cost), for example,
Y3/8N3 output speed sensor
0722 The signal from component Y3/8n3 (Output speed sensor (VGS)) is not available
2207 Component Y3/8n3 (Output speed sensor (VGS)) is defective
2206 Component Y3/8n3 (Output speed sensor (VGS)) is defective
2550 Component Y3/8n3 (Output speed sensor (VGS)) is defective or Range Sensor trouble code/s.
0705 - Transmission Range Sensor Circuit malfunction
2214 - Transmission Range Sensor Circuit malfunction
Considering the massive amount of 2004 and up
Mercedes's equipped with 722.9 7G-Tronic
transmission TCM failures, we perfected a REPAIR
KIT that will completely restore your TCM for
these known problems.
722.9 transmission was offered starting in :
- as an option in new SLK (R171 - 09/04)
- standard equipment for new M Class (W164 -2005)
- standard equipment for new R Class (W251 -2005)
- standard equipment for new G Class (X164 -2006)
- standard equipment on CLS 350 / 500 (late 2004)
- standard equipment on E350 (starting from late 2004)
Conductor Plate part numbers:
Part number is printed on the TCM itself.
Look for highlighted number!
We also recommend to Compare the image of TCM
posted to your TCM
We will install the REPAIR KIT, make necessary
repairs on the circuit board, perform a final test
on repairs done and return it to you.
No additional programming is required.
IMPORTANT: After installation history trouble
code/s recorded must be erased using original STAR
tester or equivalent.
Please ignore the handling time stated in the
shipping details. We have customers all over the
world and have to account for the amount of time
it may take for their modules to arrive at our
repair shop. Actual repair time is 1-2 business
days from the time we receive your module.
Not all modules are repairable, and unfortunately,
some of them damaged beyond the repair point.
Please, send your original TCM, do not send
"replacement" or "salvage
yard" units, they do require SCN coding.
Do not send the Valve Body itself, doing so will
increase return shipping cost.
This is your mechanic's responsibility to
pinpoint the problem in the Transmission Control
We do not diagnose the problem over the phone!
For years and thousands of those modules repaired
we have practically no warranty returns.
Removing-Installation instructions for DIY
available, email me after buying this service, but
it's recommended to do the replacement in a
professional mechanic shop, as the transmission
pan and valve body must removed to get an access
Non-repairable modules, or modules with no repairs
needed will be returned to you for the shipping
Please, pack it very well ( we recommend to double box it) - piece is really fragile,
KENNY : 033XXXX3326 / 03-8211 3959 / 033XXXX3329 / 033XXXX332
Return shipping Thru Poslaju Malaysia(Local) with
delivery confirmation is RM35 , 2-3 bus days.
Repairs done to Your Transmission Control Module
covered with 6mth warranty .
please visit our mudah.my for more info: